MFJ 1701 antenna selector

Description

MFJ 1701 antenna selector
This is a used piece of equipment, has signs of use and wear/scratches.
Ships via USPS Priority mail
International sales welcomed and ship through the eBay Global Shipping Center.
Shipping times will vary if going out of the country. Specified delivery times listed on the ad is to US addresses and will also vary.  The eBay Global shipping center is included in that and not the final destination outside of the US.
The information listed below is from the manufacturers website and does not reflect what is included in the sale.  It is for reference use:
Six position antenna switch. Select 1 of 6 antennas. 1.8 - 30 MHz.
Unused terminals are grounded. SO-239 connectors. 2kW PEP, 1 kW CW. 50 - 75 Ohm loads.
MFJ-1701 6-Position Antenna Switch
Thank you for purchasing the MFJ-1701 6-Position Antenna Switch. The MFJ-1701 provides ease in switching antennas without disconnecting a connector. This 6-position antenna switch can be used for 52 to 75 ohm systems, plus handle 2000 watts SSB, 1000 CW. All unused terminals are automatically grounded for static/lighting/RF protection.
CAUTION: Do not switch antennas while keying the transmitter.
OPERATIONS
Case 1: One radio and several antennas
Connect the output of the radio to the common connector of the MFJ-1701. Connect the antennas to any of the remaining connectors from 1 to 6.
Case 2: One antenna and several radios
Connect the antenna to the common connector of the MFJ-1701. Connect the radios to any of the remaining connectors from 1 to 6.
Case 3: Separate transmitter and receiver and several antennas
In this case, either there is a 2-position switch between the transmitter and receiver or there is not one. If not, then one can be purchased from MFJ Enterprises, Inc. (Model: MFJ-1702). If there is one, then connect the output of the switch to the common connector of the MFJ-1701. Connect the antenna to any of the remaining connectors from 1 to 6.